Technical Support
Basic operating instruction
When using OMEFLEX rubber foam insulation materials, it is recommended to use rubber and plastic special glue and adhesive tape to carry out construction according to the following operating procedures:
1. All sections and joints shall be sealed with special glue under slight extrusion.
2. When installing, the tube should be installed first; First bend, tee straight pipe, final valve, flange, all accessories installed must reach the design thickness.
3. The seam of the pipe should be installed in the inconspicuous place as far as possible, and the slit of the two pipes should be staggered.
4. When outdoor use, the outer protective layer should be made on the surface of "orus", and the protective layer should be installed with glue drying for more than 36 hours.
If you have any problems, please contact Hebei OMEFLEX Thermal Insulation Material Co.,Ltd. TEL: 0316-3280666